Weight of 4/0 Copper Wire Per Foot

A single bare 4/0 AWG copper conductor weighs about 0.646 pounds per foot (0.293 kg per foot). Finished 4/0 cable weighs more because it may include insulation, a jacket, additional conductors, a ground wire, shielding, or armor. Use the bare-conductor figure for stripped copper; use the cable maker’s listed weight for a complete cable.

Use this table to match the number to the item you are actually weighing.

Item Approximate Weight What Is Included
One bare or fully stripped 4/0 copper conductor 0.646 lb. per ft. Copper conductor only
50 ft. of one bare 4/0 copper conductor 32.3 lb. Copper conductor only
100 ft. of one bare 4/0 copper conductor 64.6 lb. Copper conductor only
Finished insulated 4/0 wire or cable Varies by product Copper, insulation, jacket, and any added conductors or components

What 4/0 Describes

4/0, also written 0000 AWG, is a large American Wire Gauge conductor size. In the AWG system, the zero sizes increase in size from 1/0 through 4/0. A 4/0 copper conductor has a nominal copper cross-sectional area of roughly 107 mm².

The important distinction is between a conductor and a cable:

  • A conductor is one metal current-carrying wire, either solid or stranded.
  • A cable is an assembly that can contain one or more conductors, insulation, an outer jacket, a grounding conductor, shielding, armor, or other materials.
  • “Stripped” usually means the insulation has been removed, leaving the metal conductor. Remove lugs, connectors, clamps, and other hardware from the calculation unless you want their weight included.

A stranded 4/0 conductor is made from many smaller copper wires, but its nominal copper area is still intended to equal the 4/0 size. Do not calculate stranded-wire weight from the bundle’s outside diameter: spaces between strands make that measurement larger than the actual copper area.

How to Calculate 4/0 Copper Weight for Any Length

First decide whether you are estimating copper-only weight, complete cable weight, or an installed circuit assembly. Those are different calculations.

What You Have Calculation to Use Result Represents
One stripped 4/0 copper conductor Bare copper weight per foot × length Copper only
One insulated 4/0 conductor Product’s listed weight per foot × length Copper plus its insulation
3-conductor 4/0 cable with a ground Product’s listed cable weight per foot × length All conductors, insulation, jacket, and ground
Cable installed in conduit Calculate cable and conduit separately unless an assembly chart is required Total installed pulling or support load

Step 1: Identify the Item Being Weighed

  1. Read the printing on the cable jacket or conductor insulation.
  2. Count every current-carrying conductor.
  3. Identify the grounding conductor’s size instead of assuming it is also 4/0.
  4. Decide whether the estimate is for stripped scrap, a cable order, shipping, pulling equipment, or support hardware.

A label such as “3C 4/0 + G” means three 4/0 conductors plus a grounding conductor, but it does not by itself tell you the ground size, jacket construction, or total cable weight.

Step 2: Measure the Actual Length

  1. Measure the length of conductor or cable in feet.
  2. Use the full purchased length for shipping or spool-weight planning.
  3. Use the installed route length when estimating the weight carried by supports or vertical runs.
  4. Include every parallel run separately.

For a single bare conductor, multiply its per-foot copper weight by the measured length. For several identical bare conductors, multiply again by the conductor count.

Step 3: Use the Bare-Copper Formula When Needed

Copper weight comes from volume multiplied by density. Pure copper has a density of about 8.96 grams per cubic centimeter, or about 0.324 pounds per cubic inch.

For a round conductor, the calculation is:

Weight = cross-sectional area × length × copper density

A 4/0 conductor has a nominal diameter of about 0.460 inch. For one foot, the calculation uses the circular area of that conductor, a 12-inch length, and copper’s density.

Weight per foot = π × (diameter ÷ 2)² × 12 × copper density

This method is appropriate for bare, round copper when you know the conductor’s nominal diameter or cross-sectional area. It is not the right method for measuring a jacketed cable by its outside diameter, because insulation and air spaces between conductors are not copper.

Step 4: Multiply for the Required Length

Multiply the measured length by 0.646 pound per foot: a 73-foot run of one bare 4/0 copper conductor weighs about 47.2 pounds.

For separate bare 4/0 copper conductors, multiply the copper-only weight by the conductor count.

Step 5: Use Product Data for Insulated Cable

For finished cable, find the manufacturer’s listed cable weight, commonly shown in pounds per 1,000 feet. Divide that listed weight by 1,000 to get pounds per foot, then multiply by your cable length.

For a cable listed in pounds per 1,000 feet, use the cable’s listed weight and actual length to calculate its weight.

Record whether your final result is copper-only, cable-only, or cable plus conduit before using it for freight, handling, tray loading, or support planning.

Why Finished 4/0 Cable Can Weigh Much More

The 0.646-pound figure applies to one 4/0 copper conductor. A complete cable can be substantially heavier because it may contain:

  • Individual conductor insulation
  • An outer PVC, rubber, or thermoplastic jacket
  • Two, three, or four large conductors
  • A separate copper or aluminum grounding conductor
  • Fillers, separators, shielding, or armor
  • Moisture-resistant or industrial-duty jacketing

For moving, hanging, shipping, or pulling finished cable, use the manufacturer’s listed cable weight rather than a bare-conductor figure.

A bare-conductor number and a circuit-chart number are not alternate estimates of the same thing.

A conduit-and-wire circuit chart may represent a configured circuit rather than one bare conductor. It may also account for the conduit type shown in the chart.

If a result is roughly double the expected bare-conductor weight, check whether the calculation includes two 4/0 conductors, a cable assembly, or an installation weight rather than one conductor.

Estimating 3-Conductor 4/0 Cable With Ground

A 4/0 three-conductor cable with ground does not have one universal weight per foot. The three 4/0 copper conductors alone contain about 1.94 pounds of copper per foot.

The grounding conductor matters because it may be smaller than the phase conductors. Its material also matters: a copper ground and an aluminum ground do not weigh the same.

For an accurate finished-cable estimate, use these details from the cable marking or product sheet:

  1. Number of 4/0 conductors.
  2. Ground conductor size and material.
  3. Copper or aluminum conductor material.
  4. Insulation type.
  5. Jacketed cable, separate conductors, shielded cable, or armored cable construction.
  6. Manufacturer’s listed weight per 1,000 feet.

A cable sold as “4/0” is not necessarily a single-conductor item. That designation identifies the size of its main conductor or conductors.

Confirm the Weight Before Ordering or Lifting

For a short stripped sample, weigh a measured length and divide its weight by the length to get a real-world per-foot check. I use a digital gram scale for short stripped samples because it separates the copper conductor’s mass from the insulation and jacket.

Use this checklist before relying on an estimate:

  • Confirm that the conductor is copper rather than copper-clad aluminum or aluminum.
  • Count all conductors in the cable, including the ground.
  • Check whether the quoted weight is net cable weight or shipping weight with a reel or spool.
  • Use the specific cable’s listed weight when planning freight, cable supports, tray load, or pulling equipment.
  • Treat wire weight as a material-handling figure, not as proof of electrical suitability or ampacity.

Frequently Asked Questions

How Much Does 50 Feet of 4/0 Copper Wire Weigh?

Fifty feet of one bare 4/0 copper conductor weighs about 32.3 pounds. That total is copper only, so a 50-foot insulated cable can weigh more depending on its insulation, jacket, ground wire, and number of conductors.

How Much Does 100 Feet of 4/0 Copper Wire Weigh?

One hundred feet of a single bare 4/0 copper conductor weighs about 64.6 pounds. For a finished cable, multiply the maker’s listed pounds-per-foot weight by 100 because cable construction adds non-copper material.

What Is the Density of 4/0 Copper Wire?

The copper itself has a density of about 8.96 grams per cubic centimeter, equivalent to about 0.324 pounds per cubic inch. “4/0” changes the conductor’s cross-sectional area, while copper density stays essentially the same for normal weight calculations.

How Much Does 4/0 Three-Conductor Cable With Ground Weigh?

There is no single answer because the ground size, insulation, jacket, and cable construction vary. The three bare 4/0 copper conductors alone weigh about 1.94 pounds per foot; add the actual ground conductor and the cable’s non-copper materials to get the finished-cable weight.

What Is the Price Per Foot of 4/0 Copper Wire?

There is no reliable single price per foot because copper prices, conductor type, insulation, cable construction, seller markup, and purchase quantity all change the cost. Compare like for like: bare copper by weight, single insulated conductors by length, and multi-conductor cable by its exact product designation and listed construction.

How much does bare 4/0 copper weigh per foot?

For bare 4/0 copper, use 0.646 pound per foot as the copper-only estimate. Insulation and a jacket add to the total weight.

How big is 4/0 copper wire?

A 4/0 copper conductor has a diameter of 0.460 inch. Standard wire-size charts also identify 4/0 as 0000.