Steel Beam Weight: How Much I-Beams and W-Beams Weigh
A beam that looks similar in depth can have much thicker flanges or web, making it substantially heavier. Start with the listed weight per foot or per meter, then multiply by the ordered length using matching units.
Use this table for a quick starting point, then verify the exact section in the supplier’s current section table before ordering, lifting, or pricing it.
| Beam or Example | Listed Weight | Total-Weight Calculation |
|---|---|---|
| Standard I-beam starting range | 4.4 to 121 lb/ft | Multiply the listed lb/ft by the beam length in feet |
| W 27 x 178 wide-flange beam | 178 lb/ft | A 40-foot beam weighs 7,120 lb |
| 203 x 133 x 30 UB | 30 kg/m | A 4-meter beam weighs 120 kg |
What Steel Beam Weight Means
A steel beam’s published weight is its mass per unit of length, not the amount of load it can safely carry. In U.S. section tables, that is usually pounds per foot. In metric universal-beam tables, it is usually kilograms per meter.
The beam’s shape controls its weight. A deeper beam, wider flanges, thicker flanges, or a thicker web all add steel. Since structural steel has a density of roughly 490 pounds per cubic foot (7,850 kg/m³), more steel volume means more weight.
The designation normally gives the quickest answer. For example, the “178” in W 27 x 178 means 178 pounds per foot. In a metric universal beam designation such as 203 x 133 x 30 UB, the final “30” identifies a listed mass of 30 kilograms per meter.
Do not use nominal depth alone to estimate shipping or lifting weight. Nominal depth or a shortened beam label is not enough information to identify a single published mass.
How to Calculate Steel Beam Weight
Match the length unit to the section table’s unit before multiplying.
Choose the calculation method that matches the designation and the length on the order or drawing.
| If the Section Table Uses | Measure the Beam In | Calculate Total Weight In |
|---|---|---|
| Pounds per foot | Feet | Pounds |
| Kilograms per meter | Meters | Kilograms |
| A fabricated or cellular-beam schedule | The finished member length | The fabricator’s stated handling weight |
Step 1: Record the Full Section Designation
- Copy the designation from the structural drawing, quote, or steel tag.
- Record the section family: W, S, UB, UC, channel, hollow structural section, or a fabricated member.
- Record the ordered cut length separately from the section designation.
- Use the section manufacturer’s or supplier’s table for that exact member.
For a W 27 x 178, “W” means a wide-flange section, “27” is the nominal depth in inches, and “178” is the listed weight of 178 pounds per foot. The beam’s actual depth, flange width, web thickness, and other dimensions still need to come from the applicable section table if they matter to the job.
Step 2: Find the Listed Weight Per Unit Length
Use the mass printed in the designation only when that is how the applicable section family is designated.
For example, a 203 x 133 x 30 UB weighs 30 kilograms per meter. The first two figures identify the nominal section dimensions in millimeters; the final figure is the mass per meter for that listed section.
A depth-and-width description identifies a general size family.
Step 3: Multiply by the Actual Cut Length
Use one of these calculations:
- Total pounds = listed pounds per foot × beam length in feet
- Total kilograms = listed kilograms per meter × beam length in meters
For a 40-foot W 27 x 178, multiply 40 feet by 178 pounds per foot. The rolled-section total is 7,120 pounds.
For a 4-meter length of 203 x 133 x 30 UB, multiply 4 meters by 30 kilograms per meter. The total is 120 kg, or about 265 pounds.
A pounds-per-foot figure must be multiplied by feet, while a kilograms-per-meter figure must be multiplied by meters. If you need to convert a metric listing to U.S. units, use the applicable unit conversion.
Step 4: Add or Subtract Fabrication Weight
The published section weight is a baseline for the rolled member. The finished piece can weigh differently when it includes:
- End plates, base plates, stiffeners, or welded tabs
- Bolt-on connection hardware supplied with the beam
- Splices or reinforcing plates
- Coping, drilled holes, web openings, or cutouts
- Shop-applied coatings or fire-protection materials
- Built-up or welded sections made from multiple pieces
Plan delivery, crane work, rigging, or storage from the finished-member information.
Finish the calculation by writing down the section designation, unit weight, cut length, calculated member weight, and any stated fabricated weight. That gives the supplier, fabricator, and lifting crew the same basis for planning.
Identifying W, I, UB, and UC Beam Weights
Beam names are often used loosely, but section families have separate tables and different weights.
W and Standard I-Beams
A W-shape is a U.S. wide-flange beam. Its designation commonly uses this format:
- W 27 x 178
- Nominal depth: 27 inches
- Listed weight: 178 pounds per foot
A standard American I-beam is often designated with an “S” prefix. Always use the table for the actual family shown on the drawing.
Universal Beams and Universal Columns
Universal beams, or UBs, and universal columns, or UCs, are separate metric section families. A UB is generally used as a horizontal bending member, while a UC has proportions commonly suited to columns and frame members.
In British Steel’s construction-section range, universal beams run from 127 x 76 x 13 to 1016 x 305 x 584.
British Steel’s universal-column range runs from 152 x 152 x 23 to 356 x 406 x 634.
Shortened Labels Such as 300W and 350W
A shortened beam label is not enough to calculate a reliable beam weight unless the drawing, regional standard, or supplier table defines the complete designation. It may refer to a nominal series or depth rather than a unique flange width, web thickness, and mass.
Cellular and Fabricated Steel Beam Weight
Cellular beams need special attention because their finished shape does not match the original rolled section. A cellular beam starts as a hot-rolled section whose web is flame-cut in a repeating pattern; the two resulting T-sections are shifted apart and rewelded to create a deeper beam with web openings.
That process can produce a favorable stiffness-to-weight relationship, but it also means the original I-beam or UB designation is not enough for handling calculations. Request the finished beam’s fabrication drawing.
ACB cellular beams can provide large uninterrupted spaces with spans of up to 30 meters, and potentially more when the project design supports it. The openings can also provide routes for building services, but they affect the member’s design and fabrication details.
Steel Beam Weight Is Not Load Capacity
Beam selection depends on project conditions. Relevant project considerations include:
- Span between supports
- Load type and location
- Beam orientation and lateral bracing
- Steel grade
- Connection design
- Deflection limits
- Openings, holes, copes, and welded attachments
- Whether the member is acting as a beam, column, brace, or part of a frame
A structural engineer must select or verify the member for the actual span, loads, support conditions, connections, and building-code requirements.
Weight is still essential for logistics. It helps determine delivery access, storage layout, lifting equipment, rigging plans, and whether the supporting surface can carry the stored material. Treat structural selection and handling weight as two related but separate checks.
Confirm the Weight Before Delivery or Installation
Before a beam is purchased or moved, confirm these items in writing:
- The full section designation, not just nominal depth
- The correct section family, such as W, S, UB, or UC
- The specified steel grade
- The listed unit weight and its unit of measure
- The exact cut length
- The calculated weight of each individual member
- Added plates, stiffeners, hardware, or other fabricated steel
- The finished weight of cellular, built-up, or welded members
- The number of pieces in a bundle or delivery
- The supplier’s handling information and the site lifting plan
This check prevents common ordering errors in pricing or transport.
For a quote, delivery plan, or lifting plan, give the supplier or fabricator the details needed to identify the finished member.
Frequently Asked Questions
How heavy is a 10-foot steel I-beam?
The actual weight requires the beam’s full designation because two beams with a similar depth can have very different flange and web thicknesses. Once the exact section’s listed pounds per foot is known, multiply it by 10 feet to find the member weight.
How heavy is a 12-foot steel I-beam?
Multiply the listed pounds per foot for the exact section by 12 feet for the order weight. Confirm the complete designation and supplier table first, because beams with similar depths can have different listed weights.
How heavy is a 20-foot steel beam?
A 20-foot steel beam weighs its listed pounds per foot multiplied by 20 feet when the section table uses pounds per foot. Confirm the complete designation and supplier table because a wide-flange beam, fabricated beam, or deeper section may fall outside the starting range.
How much does a 250 x 80 steel beam weigh per linear foot?
A 250 x 80 description alone does not identify a single published mass per meter or pounds per linear foot. Get the complete section designation and its listed unit weight before converting units.
What is the difference between a 300W and 350W steel beam?
The exact difference depends on the standard and complete designation behind those shortened labels. Compare the supplier’s full section data for depth, flange width, web thickness, and mass per unit length rather than assuming a shortened label predicts the beam’s weight.
How much weight can a W-beam hold?
A W-beam’s own weight does not determine how much load it can carry. The answer requires the full W-shape designation, span, supports, bracing, steel grade, connections, load placement, and allowable deflection; have a structural engineer verify the member for the actual project.
How much does a 6-inch steel I-beam weigh?
A 6-inch standard American S-beam can weigh 12.5 or 17.25 pounds per foot, depending on its complete designation. Use the listed pounds-per-foot value and the beam’s actual length to determine the total piece weight.
