Grade 5 Titanium: Properties, Uses, and How to Buy It

Grade 5 titanium (Ti-6Al-4V) is a high-strength titanium alloy containing about 6% aluminum and 4% vanadium. It is the most widely used titanium alloy because it combines low weight, corrosion resistance, fatigue resistance, and much greater strength than commercially pure titanium. The important buying detail is that “Grade 5” describes the alloy family, while the product form, heat-treatment condition, and certification determine how a particular piece will perform.

What Grade 5 Titanium Is

Grade 5 titanium is an alpha-beta titanium alloy, meaning it contains two metallurgical phases that help it balance strength, toughness, heat-treatability, and corrosion resistance. Its common names include:

  • Ti-6Al-4V
  • Ti 6-4
  • 6Al-4V
  • Titanium Grade 5

Aluminum stabilizes the alloy’s alpha phase, while vanadium stabilizes its beta phase. The result is a material that is substantially stronger than commercially pure Grades 1 through 4 titanium, but more difficult to bend and form.

Grade 5 is used where weight matters but a part must still handle significant loads: aerospace fasteners and engine parts, performance automotive components, pressure vessels, sporting goods, industrial hardware, and some jewelry. It is also available as sheet, plate, bar, rod, wire, tubing, and machined stock.

The condition of Grade 5 stock matters as much as the grade name. Annealed material is generally the better starting point for forming, while solution-treated-and-aged material is selected when higher hardness and strength are more important than easy forming.

How to Select and Buy Grade 5 Titanium

Start with the job the part must do, then write a purchase description that covers the alloy identity, product form, and material condition. This prevents a supplier from substituting a different titanium grade or a different heat-treated condition.

Use this table to match the project to the right questions before ordering.

Project need What to specify What to avoid assuming
Machined part Product form, dimensions, condition, and mill certificate That all Grade 5 bar machines the same way
Bent or stretched part Annealed condition and the planned forming method That it will bend easily at room temperature
High-strength structural part Required heat-treatment condition and mechanical-property requirements That annealed stock has the same hardness as aged stock
Welded assembly A qualified welding procedure and shielding approach That ordinary weld shielding protects the whole heated area
Jewelry or body-contact item Documentation for the complete item, including posts, backs, coatings, and soldered parts That every titanium-colored component is Grade 5
High- or low-temperature service Alloy-maker data and the component design specification That melting temperature equals safe operating temperature

Step 1: Define the Job Before Choosing the Condition

  1. Decide whether the part will be machined, formed, welded, heat treated, or used as-purchased.
  2. Identify the performance priority: easy forming, high hardness, fatigue resistance, corrosion resistance, or low weight.
  3. Specify the stock form you need, such as sheet, plate, round bar, wire, or a finished component.
  4. Confirm the grade before accepting a substitution.

Ti-6Al-4V-ELI is Grade 23, not ordinary Grade 5. “ELI” means extra-low interstitials: lower levels of elements such as oxygen and iron improve ductility and fracture toughness, with some reduction in strength. Grade 23 is related to Grade 5 but is a distinct alloy specification, so it should not be substituted automatically.

For a part that needs serious bending or stretching, start with annealed material. Grade 5 is difficult to form at room temperature even when annealed, so a hard or aged condition is usually a poor choice for a part that must be reshaped.

Step 2: Put the Exact Alloy Identity on the Purchase Order

Ask for the full alloy identification, not just “titanium Grade 5.”

For example, alloy maker ATI identifies its product as “ATI Ti-6Al-4V, Grade 5 alloy (UNS R56400).” When comparing supplier paperwork or a mill certificate, match the grade name, Ti-6Al-4V designation, and UNS identifier where applicable.

Also request:

  1. The product form and dimensions.
  2. The stated condition, such as annealed or solution treated and aged.
  3. A material test report or mill certificate for the actual lot.
  4. Any required chemistry, mechanical-property, inspection, or traceability requirements.

A gray metallic appearance cannot confirm the grade. Do not identify a titanium grade by ordinary appearance alone.

Step 3: Choose Annealed or Solution-Treated-and-Aged Stock

For ATI Ti-6Al-4V Grade 5, typical hardness is Rockwell C 30–34 in the annealed condition and about Rockwell C 35–39 after solution treatment and aging. Those values apply to ATI’s product and stated conditions; confirm the actual hardness and heat-treatment condition on the material test report for the stock you are buying.

Annealed stock is generally the practical choice for subsequent welding. Solution-treated-and-aged stock is suited to applications where higher hardness and strength are needed and the part is already close to its final shape.

Step 4: Estimate the Finished Part Weight

Grade 5 titanium is notably lighter than steel, which is one reason it is selected for weight-sensitive parts. For estimating, Grade 5 listings are commonly around 0.160 lb/cu. in. and roughly 4.43–4.47 g/cc; confirm the exact value on the supplier’s material data sheet or material test report.

ATI lists a density of 0.160 lb/cu. in. for its Ti-6Al-4V Grade 5 alloy. To estimate a solid part’s weight, multiply its finished volume in cubic inches by the density.

For example, a solid part’s finished volume can be used to estimate its weight:

10 cu. in. × 0.160 lb/cu. in. = 1.60 lb

Subtract holes, pockets, threads, and other removed material from the volume estimate. For a sheet-metal part, calculate the finished area multiplied by thickness, then account for cutouts and formed features.

Step 5: Confirm Operating Temperature Separately From Melting Temperature

Do not use titanium’s high melting range as a design temperature. The relevant limit is the temperature range allowed by the alloy maker and the part’s design requirements.

ATI rates its Ti-6Al-4V Grade 5 alloy for cryogenic temperatures to about 800°F (427°C). That is an application-temperature capability for ATI’s alloy, not a universal temperature limit for every Grade 5 product, component geometry, surface condition, or loading situation. Confirm the alloy maker’s data sheet and the component design specification when the part will see elevated temperature, thermal cycling, pressure, or fatigue loading.

Working Grade 5 Titanium

Grade 5 can be machined, formed, forged, and heat treated, but it is not a metal that rewards casual shop methods. Its strength and tendency to resist deformation make setup rigidity, heat control, and contamination control especially important.

Machining Grade 5 Titanium

Machine Grade 5 with methods similar to those used for austenitic stainless steel: slow cutting speeds, heavy feeds, rigid tooling, and plentiful cutting fluid. For ATI Ti-6Al-4V Grade 5, the cutting fluid should be non-chlorinated.

The goal is to keep the cutting edge engaged cleanly and avoid rubbing, chatter, and concentrated heat. Use tooling and a setup designed for titanium rather than applying a generic aluminum or mild-steel machining plan.

I use files and sandpaper only for controlled edge cleanup after machining, because they are better suited to small finishing adjustments than reshaping this strong alloy by hand.

Forming and Forging Grade 5

Grade 5 is difficult to form at room temperature, even in the annealed condition. For severe bending or stretching of annealed ATI Ti-6Al-4V Grade 5, ATI permits forming at temperatures up to 1,200°F (649°C) without affecting its mechanical properties.

For hot sizing or shaping, ATI gives a creep-forming range of 1,000–1,200°F (538–649°C) for its Grade 5 alloy. These are product-specific forming values, so confirm the alloy maker’s forming specification for the purchased condition and stock form.

Forging requires equally specific control. For optimum properties, ATI specifies that its Grade 5 alloy be finish-forged from 1,750°F (954°C), with a finishing temperature of 1,450°F (788°C), and recommends minimum reductions of 35%. Those values are stated in the material guidance.

Heat Treating Grade 5

Heat treatment can raise Grade 5’s hardness and strength, but it must be planned around the starting condition, section thickness, final properties, and subsequent fabrication steps.

Where high hardness, tensile strength, and fatigue strength are desired, ATI specifies annealing its Ti-6Al-4V Grade 5 alloy at 1,700–1,900°F (927–1,038°C). Do not treat that range as a universal home-shop recipe: time at temperature, cooling method, stock form, and prior processing all affect the final result.

Weld Grade 5 Without Contamination

Fusion welding Grade 5 requires more than shielding the visible weld puddle. Oxygen, nitrogen, and hydrogen contamination can reduce ductility and harm notch sensitivity and forming behavior.

Prepare a fusion-welding process in this order:

  1. Use material in a condition suitable for the qualified welding procedure.
  2. Establish inert-gas protection before making the weld.
  3. Protect both the molten metal and the adjacent heated zones during welding.
  4. Use either an inert-gas-filled chamber or inert-gas welding with a trailing shield, as ATI specifies for its Ti-6Al-4V Grade 5 alloy.
  5. Complete post-weld inspection against the acceptance criteria in the qualified welding procedure specification.

Contamination control also matters outside welding. Improper pickling and pickup of oxygen, nitrogen, carbon, or hydrogen during forging, heat treating, or brazing can deteriorate ductility. Keep chemical processing, heating, and joining methods matched to titanium-alloy requirements rather than assuming procedures intended for stainless steel will transfer directly.

Verify Grade 5 Stock Before Fabrication

A mill certificate is useful only if it matches the material in hand and the requirements of the part.

Use this receiving checklist:

  • Match the purchase order to the grade and alloy designation.
  • Confirm the product form: plate, sheet, bar, wire, tube, or forging.
  • Confirm the stated material condition.
  • Match heat or lot identification on the stock to the certificate when traceability is required.
  • Review the reported chemistry and mechanical properties against the project requirement.
  • Confirm any requested hardness, inspection, or heat-treatment documentation.
  • Keep the paperwork with the stock until fabrication and final inspection are complete.

For critical work, label cut pieces before separating them from the original marked stock.

Grade 5 Titanium for Jewelry and Skin Contact

Grade 5 is used for durable jewelry components because it is light, corrosion resistant, and more resistant to bending than commercially pure titanium. It can also be colored through anodizing, although a colored surface does not identify the underlying grade.

For jewelry, ask about the entire item rather than only the advertised metal. A piece described as titanium may include a different metal in its pin, clasp, back, setting, coating, soldered joint, or decorative insert. That matters for durability, corrosion behavior, and potential skin contact.

Titanium is not a treatment or a source of health benefits from wearing it. If a piece causes persistent irritation, swelling, rash, or discomfort, stop wearing it and speak with a clinician; material information cannot diagnose a skin reaction.

Your next step is to send suppliers a written request naming the dimensions, certification needs, and intended use, then review the offered paperwork.

Frequently Asked Questions

Is Grade 5 titanium alloyed?

Yes, Grade 5 titanium is an alloy. It is called Ti-6Al-4V and contains about 6% aluminum and 4% vanadium. Grade 5 titanium is an alloy called Ti-6Al-4V, made primarily of titanium with about 6% aluminum and 4% vanadium. It is not commercially pure titanium, which is why it has higher strength and can be heat treated.

What grade is TC4 titanium?

TC4 is an abbreviation that should be verified against supplier documentation before it is treated as a specific titanium grade. Do not rely on the abbreviation alone for critical work, because the governing specification, product form, chemistry limits, and heat-treatment condition still need to be verified on the supplier documentation.

Is Grade 5 titanium stronger than steel?

Grade 5 titanium is not automatically stronger than every steel, because steel strength varies enormously by alloy, heat treatment, and product form. Its main advantage is high strength relative to its weight: a Grade 5 part can often achieve useful strength while weighing much less than a comparable steel part.

How much is 1 lb of Grade 5 titanium worth?

There is no fixed per-pound price for Grade 5 titanium. Cost changes with product form, size, condition, certification, quantity, machining allowance, and market availability; small certified bar or sheet orders usually cost more per pound than larger production orders.

Does titanium have health benefits?

No health benefit comes from wearing or handling titanium jewelry or hardware. Titanium alloys are used in some medical devices because of engineering and biocompatibility requirements, but that does not make a Grade 5 item a medical product or a treatment for skin concerns.

Can you buy Grade 5 titanium?

Yes, you can buy Grade 5 titanium from specialty metal suppliers. Specify the product form, dimensions, condition, and certification needs before ordering. Specialty metal suppliers sell Grade 5 as sheet, plate, bar, rod, wire, tube, and cut-to-size stock.